Do You Need a WSIB Clearance Before Hiring a Contractor for Your Rental?

KEILTY resident guide card reading Report it. Track it. Done, beside a phone showing a maintenance request with a wrench icon and three numbered steps: submit, triaged, fixed.

Yes, in most cases. If you directly hire a contractor to do construction work on a rental you do not live in, section 141.2 of Ontario's Workplace Safety and Insurance Act, 1997 requires a WSIB clearance certificate before the work begins. The homeowner exemption does not reach a unit occupied by an ordinary tenant.

Skip it and you can end up paying the contractor's unpaid WSIB premiums on top of the invoice. The clearance itself is free and available online. Here is what the Act actually says, what skipping it can cost, and how to build it into every job on your rental.

Why doesn't the homeowner exemption cover your rental?

Because the exemption is tied to who lives in the home, not to who owns it.

The duty to collect a clearance switches off only for "exempt home renovation work". Section 12.2 (10) of the Workplace Safety and Insurance Act, 1997 defines that as construction work performed by an independent operator, a sole proprietor, a partner in a partnership or an executive officer of a corporation, and "...on an existing private residence that is occupied or to be occupied by the person who directly retains the independent operator, sole proprietor, partnership or corporation, or by a member of the person's family".

Your tenant is not you, and in the ordinary case your tenant is not family. So a roof, a furnace replacement or a bathroom renovation on a tenanted house falls outside the exemption. The same job on the house you live in could sit inside it.

Some owners live in part of the building and rent out the rest, such as a basement unit or the other side of a duplex. Do not assume the exemption covers work on the rented part. The definition does not deal with a building that is partly owner-occupied and partly rented, so ask the WSIB before relying on it, or simply collect the clearance.

The family limb matters for some owners.

The Act's list of family members is a spouse, a child or grandchild, a parent, grandparent, father-in-law or mother-in-law, a sibling, and the matching "step" relationships. If the unit is occupied or to be occupied by your daughter or your mother, the work can be exempt home renovation work.

Two conditions sit beside that limb and are easy to miss: the home must be an "existing private residence", and the work must be performed by an independent operator, a sole proprietor, a partner or an executive officer, which leaves out work done by a firm's employees.

The WSIB's own policy draws the line the same way. Its Operational Policy Manual document 14-02-19, "Clearance Certificate in Construction", says "This policy does not apply to householders who occupy or will occupy a private residence when they (or members of their family) directly retain a contractor to perform exempt home renovation work only, or..."

What does the Act require before the contractor starts?

Four things, all in section 141.2, which subsection (1) says "...applies in respect of a person who directly retains a contractor or subcontractor to perform construction work." That is you, if you hire the trade yourself.

"Construction" is wider than it sounds. The Act defines it as the industries in Class G of Schedule 1, and O. Reg. 175/98 describes Class G as "Industries engaged in building, repairing and renovating buildings and engineering works, and in subdividing and developing land". Its subclasses run from residential building construction to building equipment and specialty trades. Repair work counts, not just new builds.

The certificate is what the WSIB calls a clearance. Its clearances page says "We provide clearances at no charge" and points you to its "...quick access clearances service to find, view and download your clearances..." You search the contractor, download the certificate, and file it with the job.

What can it cost you if you skip the clearance?

Two separate things: the contractor's premiums, and a provincial offence.

The money first. Section 141.1 (2) says a person who directly retains a contractor to perform construction work "(a) shall ensure that the contractor or subcontractor complies with the contractor's or subcontractor's payment obligations under this Act in respect of the work; and (b) is liable for those obligations, to the extent that the contractor or subcontractor does not comply with them." If your roofer never paid WSIB for the crew on your roof, that bill can come to you.

The WSIB's policy puts a ceiling on it: "Without a clearance, the principal may be liable for the contractor's payment obligations to the WSIB, up to the value of the labour portion of the contract(s) between the contractor and the principal." Note the word "may". The exposure is a possibility, measured against labour, not the whole invoice.

The offence second. Section 151.2 (1) makes it an offence for the person who retains the contractor to fail to comply with subsections 141.2 (2), (6) or (9), or to contravene subsection (8).

Section 158 (1) sets the maximum: for an individual, "...a fine not exceeding $25,000 or to imprisonment not exceeding six months or to both", and for anyone who is not an individual, such as a corporation that owns the rental, "...a fine not exceeding $500,000." Section 158 (1.1) raises that to $750,000 per conviction where a non-individual is convicted of two or more counts of the same offence in one proceeding.

One discrepancy to know about. The WSIB's clearances page, updated 2026-07-20, says "a maximum fine for a conviction of an offence under the WSIA is $100,000." The Act, read at source on 2026-11-16, says $25,000 for an individual and $500,000 for anyone else. The statute governs; the page figure does not match either number.

Can you get the money back from the contractor?

Yes, on paper, and the Act gives you three tools. Section 141.1 (3) entitles you to be reimbursed by the contractor for amounts you paid under subsection (2). Under subsection (4), the Board decides the extent of the contractor's liability. Section 141.1 (5) says "The person may deduct amounts for which the contractor or subcontractor is liable under subsection (3) from money payable to the contractor or subcontractor." Section 141.1 (6) adds a right to be indemnified.

The catch is practical. A contractor who did not pay the WSIB is often a contractor who is hard to collect from. Set-off only helps while you still owe them money, which is one reason to check the clearance before work starts rather than at the final invoice.

Better still, the Act gives you a way out of the liability altogether. Section 141.1 (9) says subsections (1) to (7) "do not apply in respect of a person who complies with section 141.2." Get the certificate, keep it current, keep a copy, and the premium exposure does not attach to you at all.

Does a one-person handyman need a clearance too?

Usually, yes, and this is where small owners get caught. Section 12.2 (1) deems "Every independent operator carrying on business in construction" and "Every sole proprietor carrying on business in construction" to be workers to whom the insurance plan applies. Section 12.3 requires an independent operator to register with the Board within 10 days of becoming one.

The exception is the same one you just read. Under section 12.2 (8), those rules do not apply to "...independent operators and sole proprietors who perform no construction work other than exempt home renovation work...", and section 12.3 (5) lifts the registration duty for the same people. A handyman who works only for homeowners on the homes they live in may lawfully have no WSIB account and no clearance to show you.

Your job is different, because your tenant lives there, not you, so it is not exempt home renovation work.

Once a handyman takes on non-exempt work, they no longer "...perform no construction work other than exempt home renovation work...", so the section 12.2 (8) exemption stops applying to them and the section 12.3 registration duty applies. Sections 12.2 (9) and 12.3 (7) also require them to notify the Board of a material change in circumstances within 10 days.

Either way, your own duty does not move. Section 141.2 (2) says you obtain a certificate before the work begins, so if the handyman cannot produce one, the job waits.

What about cleaners, snow removal and landscapers?

A different section applies, with no certificate-before-start rule, but a similar money risk. Section 141 (1) says "This section applies when a person retains a contractor or subcontractor to perform work in an industry included in Schedule 1 or Schedule 2, other than construction." Schedule 1 to O. Reg. 175/98 includes Class M, whose description reads in part "...services to buildings, dwellings and open spaces..."

Under section 141 (2), the Board "may determine" that you are the deemed employer of the contractor's workers and make you liable for their premiums.

If it does not, section 141 (6) says the person "(a) shall ensure that the contractor or subcontractor complies with the contractor's or subcontractor's obligations to make payments under the insurance plan as an employer; and (b) is liable to the extent the contractor or subcontractor does not meet those obligations." If the Board deems you the employer, subsections (3) and (5) give you reimbursement and set-off; if it does not and you pay under subsection (6), subsection (7) gives you a right of indemnity.

Section 141 (10) lets the Board issue a certificate confirming compliance for these contracts too. Unlike section 141.1 (9) for construction, nothing in section 141 says holding that certificate switches your liability off. For a recurring snow or cleaning contract, asking for one at the start is still useful evidence that the contractor is in good standing.

Is WSIB the only Act that reaches a renovation you run yourself?

No. If you run a larger job yourself and hire several trades directly, check the Occupational Health and Safety Act as well. It defines "constructor" as "...a person who undertakes a project for an owner and includes an owner who undertakes all or part of a project by himself or by more than one employer..." Hire a plumber, an electrician and a drywaller separately on one renovation and you may be the constructor, with the duties section 23 of that Act sets out.

That is a separate regime with its own rules. It is one more reason owners who renovate between tenancies often hand the coordination to a general contractor or a manager. Whoever takes the job on, the repair obligation itself stays with you. Section 20 (1) of the Residential Tenancies Act, 2006 keeps the duty to maintain the unit on the landlord. We cover it in what repairs a landlord is responsible for in Ontario.

How does a Cornwall duplex owner handle this in practice?

Take an owner of a tenanted side-by-side duplex in Cornwall who lives in Ottawa. The roof on one side is failing. A local roofer quotes $16,000, of which $7,000 is labour. Those figures are illustrative; your quote will differ.

Here is the checklist that keeps the WSIB exposure at zero:

  1. Before signing, search the roofer in the WSIB's quick access clearances service and download the certificate.
  2. Check the expiry against the schedule. The WSIB says "Clearances are valid for up to 90 days from the date of issue" and "Most clearances expire on the 20th of February, May, August and November each year." A certificate expiring on the 20th of February does not cover a job that starts on the 1st of March.
  3. If the job runs past the expiry, line up the new certificate before the old one lapses. Section 141.2 (6) requires a new one once it expires, and subsection (8) bars you from letting work continue while you know none is in effect.
  4. Check the subcontractors. If the roofer brings in a crew it hires itself, that crew is the roofer's to clear, not yours. Section 141.2 applies to the person who directly retains the contractor, and the roofer retained that crew. Anyone you hire yourself is yours. If your property manager signs the work order in its own name, the clearance duty may sit with the manager instead, so confirm in writing who holds it.
  5. File the certificate with the invoice and keep both for at least three years.

Now the cost of skipping step one. Suppose the roofer has a WSIB account in arrears. Without a clearance, the policy's ceiling is the labour portion: up to $7,000, on top of the $16,000 already paid. That is the ceiling; the actual bill is the roofer's unpaid obligations for this job, which is usually less.

That is two totals, not one: a $16,000 roof can become a $23,000 roof, less whatever you later recover from the roofer under section 141.1. With a clearance on file, section 141.1 (9) means none of that attaches to you.

This is routine paperwork for a property manager and easy to forget for an owner two hours away. At KEILTY, we only use contractors who carry liability insurance and WSIB clearance. Owners who bring their own contractor are held to the same standard, as our maintenance coordination page explains. If you own a duplex or small building, our small multi-family management covers the full repair cycle, from quote to filed paperwork.

What do owners ask about WSIB and contractors?

Do I need a WSIB clearance before hiring a contractor for my rental property in Ontario?

Usually yes. If you directly hire a contractor for construction work, section 141.2 of the Workplace Safety and Insurance Act, 1997 requires you to obtain a clearance certificate before work begins. The exemption for exempt home renovation work applies only to a private residence occupied or to be occupied by you or a member of your family, not your tenant.

What happens if I hire a contractor without a WSIB clearance?

You can become liable for the contractor's unpaid WSIB payment obligations for the work, up to the labour portion of the contract under the WSIB's policy. Failing to obtain the certificate is also an offence under section 151.2. The maximum under section 158 is a $25,000 fine, six months' imprisonment or both for an individual, and a $500,000 fine for anyone else. That rises to $750,000 per conviction where a non-individual is convicted of two or more counts of the same offence in one proceeding.

Does the WSIB charge for a clearance certificate?

No. The WSIB says it provides clearances at no charge, through its quick access clearances service. Clearances are valid for up to 90 days from the date of issue. Check the expiry against the length of the job, and get a new one if it runs out first.

A clearance costs nothing. Skipping it hands you someone else's premium bill, and the cheapest time to check is before the first shingle comes off.

Own a rental in Kingston or Eastern Ontario? KEILTY Realty Management manages it for a flat monthly rate. Get a free rental evaluation or book a 30-minute discovery call with A.J. Keilty.

This post is general information about Ontario workplace safety and insurance law as it applies to rental owners, as of 2026-11-16, not legal advice. Legislation, regulations and WSIB policy change. For advice on a specific property or situation, speak with a lawyer or licensed paralegal.

About the Author

A.J. Keilty is President of KEILTY Realty Management, where his team manages residential and commercial rentals across Ontario with a flat rate, same-day answers, and no surprises. Since 2003, KEILTY has helped owners, from single-family landlords to institutional portfolios, protect their assets and maximize returns.

Keep reading